Libris Britannia 4/science library(b).zip/science library(b)/TECHNICA/COMPUTER/H514.ZIP/VENDOR.TXT

Text File | 1993-10-20 | 14KB | 303 lines

                  - TommySoftware CAD/DRAW Version 1.11a -


                    V E N D O R    I N F O R M A T I O N
                   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

                        Last updated:  October, 1993

This file provides information for Shareware Distributors, Disk Vendors and
Computer Clubs who wish to distribute the TommySoftware CAD/DRAW package.

-----------------------------------------------------------------------------
                    Description of TommySoftware CAD/DRAW
-----------------------------------------------------------------------------
Powerful CAD and drawing application for
Windows 3.x. Features are:
 - Associative dimensioning,
 - User defined hatchings,
 - Library mamangement,
 - Context sensitive help.
It can be used to draw just about anything, using it's own drawing
tools, multiple layers, and color support. Based on the best selling
CAD program in Germany, this English version is easier to use and more
powerful than any other CAD program available in shareware. By
TommySoftware.

-----------------------------------------------------------------------------
                          Distribution Requirements
-----------------------------------------------------------------------------

Individuals who wish to distribute the TommySoftware CAD/DRAW package to
friends or associates may do so as long as all files remain intact and no
fees are charged.

-----------------------------------------------------------------------------
 IF YOU DISTRIBUTE THIS PROGRAM ON MORE THAN 1 FLOPPY READ NOTES AT BOTTOM!
-----------------------------------------------------------------------------

Computer Clubs and User Groups wishing to add the TommySoftware CAD/DRAW
package to their disk library may do so in accordance with the Distribution
Restrictions listed below.

( If you would like your Computer Club or User Group to be placed on our
  mailing list for future upgrades to any of our products, please contact
  your country's TommySoftware partner. For the address of the TommySoftware
  partners, see the end of this text. )


Limited Distribution License:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As the exclusive copyright holder for TommySoftware CAD/DRAW, the local
TommySoftware partner authorizes distribution only in accordance with the
following restrictions.

ASP Approved Vendors in good standing are hereby given permission to distri-
bute TommySoftware CAD/DRAW by means of catalog, or BBS. Any other form of
commercial distribution by anyone requires prior permission.

Non-ASP member vendors must request permission prior to distributing this
package.

                              - Page 1 of 5 -
                  - TommySoftware CAD/DRAW Version 1.11a -

The TommySoftware CAD/DRAW package is defined as containing all the material
listed in the PACKING.LST text file. If any files listed in the PACKING.LST
text file, or the PACKING.LST file itself, are missing, then the package is
not complete and distribution is forbidden. Please contact us to obtain a
complete package suitable for distribution.

The TommySoftware CAD/DRAW package - including all related program files and
documentation files - CANNOT be modified in any way and must be distributed
as a complete package, without exception. The PACKING.LST text file contains
a list of all files that are part of the TommySoftware CAD/DRAW package.

( Small additions to the package, such as the introductory or installation
  batch files used by many shareware disk vendors, are acceptable as long as
  the final installation of TommySoftware CAD/DRAW is still performed by
  means of the original program SETUP.EXE. )

No price or other compensation may be charged for the TommySoftware CAD/DRAW
package. A distribution fee may be charged for the cost of the diskette,
shipping and handling, as long as the total (per disk) does not exceed
US$ 10.00 in the U.S. and Canada, or US$ 12.00 internationally.


Disk Sets & CD-ROMs:
~~~~~~~~~~~~~~~~~~~~
The TommySoftware CAD/DRAW package CANNOT be sold as part of some other
inclusive package. Nor can it be included in any commercial software packaging
offer, without a written agreement from the local TommySoftware partner and
and TommySoftware. This includes any sales in a retail environment.

Vendors (non-ASP Vendor Members) who wish to distribute the TommySoftware
CAD/DRAW package as part of a collection (such as a multi-program set, or a
CD-ROM package) must obtain permission from the local TommySoftware partner
or TommySoftware prior to beginning such a distribution.

If you wish to add any of our programs to a CD-ROM or other collection, please
check the release date of the version you have. If the version is over twelve
(12) months old then please contact us to ensure that you have the most current
version. This version was released in October, 1993.


Disk-of-the-Month (or Subscription) Distribution:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you would like to distribute the TommySoftware CAD/DRAW package as a
Disk-of-the-Month, or as part of a subscription or monthly service, then the
following restrictions apply:

 - ASP Associate (Disk Vendor) Members in good standing are hereby given
   permission to distribute the current TommySoftware CAD/DRAW package under
   the Disk-of-the-Month style of distribution.

 - Others (non-ASP Members) must contact the local TommySoftware partner in
   advance to ensure that you have the most current version of the software.

 - You cannot use a Disk-of-the-Month distribution to use up your inventory
   of old (out of date) disks. Only current versions may be shipped as
   Disk-of-the-Month disks.

The PRINTED User's Guide may not be reproduced in whole or in part, using
any means, without the written permission of TommySoftware. In other words,
the disk-based documentation may not be distributed in PRINTED (hardcopy)
form.

The TommySoftware CAD/DRAW package cannot be "rented" or "leased" to others.

                              - Page 2 of 5 -
                  - TommySoftware CAD/DRAW Version 1.11a -

You may not list any of our products in advertisements, catalogs, or other
literature which describes our products as "FREE SOFTWARE". Shareware is
"Try-Before-You-Buy" software, it is not free.

TommySoftware prohibits the distribution of outdated versions of the
TommySoftware CAD/DRAW package by anyone, without written permission from
TommySoftware. If the version you have is over twelve (12) months old, please
contact us to ensure that you have the most current version. This version was
released in October, 1993.

Licensee shall not use, copy, rent, lease, sell, modify, decompile,
disassemble, otherwise reverse engineer, or transfer the licensed program
except as provided in this agreement. Any such unauthorized use shall result
in immediate and automatic termination of this license.

( U.S. Government Information:  Use, duplication, or disclosure by the U.S.
  Government of the computer software and documentation in this package shall
  be subject to the restricted rights applicable to commercial computer
  software as set forth in subdivision (b)(3)(ii) of the Rights in Technical
  Data and Computer Software clause at 252.227-7013 (DFARS 52.227-7013). The
  Contractor/manufacturer is Pik A Program, 13 Saint Marks Place, NY, NY
  10003. )

All rights not expressly granted here are reserved to TommySoftware.

-----------------------------------------------------------------------------
    NOTICE FOR PREPARING AND SEPARATING CAD/DRAW FILES FOR DISTRIBUTION:
-----------------------------------------------------------------------------

If you distribute TommySoftware CAD/DRAW on diskette, and will put the full
program on one high density diskette, please put all files onto the diskette
for your customers.

If you upload to a bulletin board, please upload the four files named
TSCD_A.EXE, TSCD_B.TSX. TSCD_C.TSX and TSCD_D.TSX. These files contain all
other files contained separately on the disk. We appreciate you helping us
distribute our programs!

If you distribute TommySoftware CAD/DRAW and wish to separate it onto more
than one diskette, you must do the following:

 - On disk 1, include the all files except the TSCD_?.TSX files. Then add (in
   numerical order) as many of the TSCD_?.TSX files that will fit on the
   disk. Please put the TSCD_A.EXE file on the first disk with the
   installation programs.

 - If you are putting the programs on 3 diskettes, TSCD_A.EXE and TSCD_B.TSX
   should be on the first disk, TSCD_C.TSX on the second disk, and TSCD_D.TSX
   on the third disk.

 - If you are using 720k disks, you may put all files except TSCD_D.TSX onto
   the first disk. TSCD_C.TSX may either be put to disk 1 or 2.


Please Help Us Serve You Better:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We would appreciate copies of anything you print regarding TommySoftware
CAD/DRAW. Please send us a copy of any review, article, catalog description,
or other information you print or distribute regarding the TommySoftware
CAD/DRAW package. Thank you for your time and assistance and for supporting
the shareware marketing concept.

Thank you for your support!

                              - Page 3 of 5 -
                  - TommySoftware CAD/DRAW Version 1.11a -

TommySoftware local partners:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Argentina:
    Estudio Shareware               Estudio Shareware
    Av. Rivadivia 5040 Local 21     Riobamba 436 piso 3 of 5
    (1424) Capital Federal          (1025) Capital Federal
    Argentina                       Argentina
    Phone [phone]            Phone [phone]
    Fax   [phone]            Fax   [phone]


Australia:                      Austria:            - German Version only -
    BRIGHTSPARK                     Husco
    PO Box 253                      Boesendorferstrasse 4
    Morley WA 6062                  A-1010 Wien
    Phone [phone]              Phone [phone]
    Fax   [phone]              Fax   [phone]


Belgium:                        Canada:
    TRAX                            Alternative Personal Software
    Steenstraat 61                  8 Roehampton Crescent
    B-8211 Zedelgem-Aartrijke       Brampton, Ontario, L6Y 2R4
    Phone [phone]            Phone [phone]
    Fax   [phone]            Phone [phone]
    CompuServe 100031,3552          Fax   [phone]
                                    CompuServe 71151,3507

Denmark:                        England:
    Professional Shareware          Omicron Systems Ltd.
    Benloese Skel 4G                45 Blenheim Crescent
    DK-4100 Ringsted                Leigh-On-Sea, Essex, SS9 3DT
    Phone [phone]               Phone [phone]
    Fax   [phone]               Fax   [phone]
    CompuServe 100065,1744          CompuServe 100016,454


France:                         Germany:            - German Version only -
    DP Tool Club                    TommySoftware Deutschland
    B.P. 745                        Abt. Shareware
    99 rue Parmentier               Selchower Strasse 32
    F-59657 Villeneuve d'Ascq       D-12049 Berlin
    Phone [phone]                Fax   [phone]
    Fax   [phone]                CompuServe 100142,3665
    CompuServe 100012,1410

Italy:                          Japan:
    MASLED INFORMATICA              Personal Data Factory
    Via dei Pioppi 9                Shimoueki-cho 451-3, Isesaki-shi
    I-04011 Aprilia (LT)            Gunma-ken 372
    Phone [phone]            Phone [phone]
    Fax   [phone]            Fax   [phone]
                                    CompuServe 101153,21


                              - Page 4 of 5 -
                  - TommySoftware CAD/DRAW Version 1.11a -

TommySoftware local partners (cont'd):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Netherlands:                    New Zealand:
    Copy Cats                       Micro South
    Postbus 1088                    PO Box 2275
    NL-1700 BB Heerhugowaard        Dunedin 9001
    Phone [phone]               Phone [phone]
    Fax   [phone]               Fax   [phone]
    CompuServe 100121,1562


Philippines:                    Singapore:
    E & J  Global Enterprise        ProjectLynx Systems & Services
    Eduardo C. De Guzman            10 New Industrial Road #02-04
    MCPO Box 2336, Makati           Singapore 1953
    1263 Metro Manila               Phone [phone]
    Phone [phone]            Phone [phone]
    Fax   [phone]            Fax   [phone]


Sweden:                         Switzerland:        - German Version only -
    Megatec                         Software News!
    Kalabratsvaegen 14              Sissacherstrasse 57
    S-54492 Hjo                     CH-4052 Basel
    Phone [phone]                Phone [phone]
    Fax   [phone]                Fax   [phone]
                                    CompuServe 100045,1002


USA:
    Pik A Program
    13 Saint Marks Place
    NY, NY 10003
    Phone [phone]  TOLL FREE (ORDERS ONLY!)
    Phone [phone]
    Fax   [phone]
    CompuServe 73730,2117


Citizens from countries not stated above should either contact Pik A Program
in the USA (for English Versions) or TommySoftware in Germany (for German
Versions).

                              - Page 5 of 5 -